Tsurumi...the Best Choice for Pumping Wet or Dry
TSURUMI B-series submersible pumps are used primarily in municipal
water supply stations and sewage treatment plants for pumping water,
sewage, and digested sludge. In industry these pumps are efficient for
controlling cooling water, process and waste water, and abrasive or
corrosive media.
The pumps are also used at many construction sites and large
factories for continuous drainage, in a sump or in a dry pit. The B-
series pumps can be installed in small, simple pump stations under
the ground or the floor, completely out of traffic.
The pumps can be mounted on a guide rail in a sump for easy
installation and removal.
FEATURES
A - Cable Sealing
(Unique Sealing Device)
Waterproof power cords prevent water infiltration: cable ends
sealed with epoxy resin and lead wires partially stripped for
perfect resin sealing - triple protection for the motor against
water penetration.
B - Motor Protection
Safety device protects the motor from overheating of its
winding caused by motor or pump malfunction.
C - Motor
Dry-type E,B, or F insulation class motor has high torque and
load with enough power to drive powerfully and efficiently.
D - Water Jacket
The perfect motor cooling is provided by a water jacket circulating drainage for the models of 22 kW and over, and for
dry-pit models.
E - Shaft Sealing Device
The mechanical shaft-seal has rigid, heat and corrosive-resistant silicon-carbide faces, superior to tungsten carbide in
anti-corrosion and anti-abrasion, guarantees longer pump life.
F - Impeller
Provides a wide passage for large size foreign material. Can be replaced with a cutter-impeller in the models with an
output of 11 kW or under.
Tsurumi HS Series - Submersible Sand/Trash Handling Torque Flow
Pump
Submersible trash pump handles sand, solids, leaves and debris up to 1" x 3/8"
using a semi-vortex impeller and shaft mounted agitator.
Easy pump end disassembly by removing only 3 cap nuts.
Tsurumi NK Series Submersible General De-watering Torque Flow Pump
High-tech materials in construction resist wear and improve pump life.
Heavy-duty, high head pumps capable of handling abrasive materials
found on construction sites.
Semi-vortex design decreases wear by minimizing contact with abrasives.
for assistance in selecting the right Tsurumi
or other pump system that is made to meet your specific needs.
Contact PPE
The right pump for your application needs
Locations
Houston / 713-783-8530
Beaumont / 713-783-8532
Austin / 512-595-4501
Pump & Power Equipment
San Antonio / 210-781-9067
McAllen / 956-668-7867
Corpus Christi / 210-781-9067
© 2011 Pump & Power Equipment, all rights reserved
Pump & Power Equipment...The right pump for your application needs
Tsurumi Submersibles
TSURUMI B-series submersible pumps are used primarily in municipal
water supply stations and sewage treatment plants for pumping water,
sewage, and digested sludge. In industry these pumps are efficient for
controlling cooling water, process and waste water, and abrasive or
corrosive media.
The pumps are also used at many construction sites and large
factories for continuous drainage, in a sump or in a dry pit. The B-
series pumps can be installed in small, simple pump stations under
the ground or the floor, completely out of traffic.
The pumps can be mounted on a guide rail in a sump for easy
installation and removal.
FEATURES
A - Cable Sealing
(Unique Sealing Device)
Waterproof power cords prevent water infiltration: cable ends
sealed with epoxy resin and lead wires partially stripped for
perfect resin sealing - triple protection for the motor against
water penetration.
B - Motor Protection
Safety device protects the motor from overheating of its
winding caused by motor or pump malfunction.
C - Motor
Dry-type E,B, or F insulation class motor has high torque and
load with enough power to drive powerfully and efficiently.
D - Water Jacket
The perfect motor cooling is provided by a water jacket circulating drainage for the models of 22 kW and over, and for
dry-pit models.
E - Shaft Sealing Device
The mechanical shaft-seal has rigid, heat and corrosive-resistant silicon-carbide faces, superior to tungsten carbide in
anti-corrosion and anti-abrasion, guarantees longer pump life.
F - Impeller
Provides a wide passage for large size foreign material. Can be replaced with a cutter-impeller in the models with an
output of 11 kW or under.
Tsurumi HS Series - Submersible Sand/Trash Handling Torque Flow
Pump
Submersible trash pump handles sand, solids, leaves and debris up to 1" x 3/8"
using a semi-vortex impeller and shaft mounted agitator.
Easy pump end disassembly by removing only 3 cap nuts.
Tsurumi NK Series Submersible General De-watering Torque Flow Pump
High-tech materials in construction resist wear and improve pump life.
Heavy-duty, high head pumps capable of handling abrasive materials
found on construction sites.
Semi-vortex design decreases wear by minimizing contact with abrasives.
for assistance in selecting the right Tsurumi
or other pump system that is made to meet your specific needs.
Contact PPE
The right pump for your application needs
Locations
Houston / 713-783-8530
Beaumont / 713-783-8532
Austin / 512-595-4501
Pump & Power Equipment
San Antonio / 210-781-9067
McAllen / 956-668-7867
Corpus Christi / 210-781-9067
© 2011 Pump & Power Equipment, all rights reserved
Pump & Power Equipment...The right pump for your application needs